manualshive.com logo in svg

HP Compaq CQ58, Maintenance And Service Manual

Share
Download
HP Compaq CQ58 Maintenance And Service Manual Download Page 104

Processor

NOTE:

This section applies only to computer models equipped with an Intel processor. AMD processors

come soldered to the system board and cannot be removed or replaced.

NOTE:

On models with Intel processors you can remove the processor from the system board. The

processor is included with the system board in AMD models and cannot be removed.

NOTE:

The processor spare part kit includes replacement thermal materials.

Description

Spare part number

Intel Core i5 processors:

3230M 2.60-GHz processor (3.0-MB L3 cache, dual core, 35 W)

711903-001

3210M 2.50-GHz processor (3.0-MB L3 cache, dual core, 35 W)

680645-001

Intel Core i3 processors:

 

3130M 2.60-GHz processor (3.0-MB L3 cache, dual core, 35 W)

713163-001

3120M 2.50-GHz processor (3.0-MB L3 cache, dual core, 35 W)

700627-001

3110M 2.40-GHz processor (3.0-MB L3 cache, dual core, 35 W)

682417-001

2370M 2.40-GHz processor (3.0-MB L3 cache, dual core, 35 W)

677152-001

2350M 2.30-GHz processor (3.0-MB L3 cache, dual core, 35 W)

653340-001

2348M 2.30-GHz processor (3.0-MB L3 cache, dual core, 35 W)

713165-001

2328M 2.20-GHz processor (3.0-MB L3 cache, dual core, 35 W)

693542-001

Intel Pentium processors:

 

2030M 2.50-GHz processor (2.0-MB L3 cache, dual core, 35 W)

713164-001

2020M 2.40-GHz processor (2.0-MB L3 cache, dual core, 35 W)

700628-001

B980 2.40-GHz processor (2.0-MB L3 cache, dual core, 35 W)

692428-001

B970 2.30-GHz processor (2.0-MB L3 cache, dual core, 35 W)

676785-001

B960 2.20-GHz processor (2.0-MB L3 cache, dual core, 35 W)

664662-001

B950 2.10-GHz processor (2.0-MB L3 cache, dual core, 35 W)

653338-001

Intel Celeron processors:

 

1000M 1.8-GHz processor (2.0-MB L3 cache, dual core, 35 W)

713162-001

B830 1.8-GHz processor (2.0-MB L3 cache, dual core, 35 W)

699547-001

B820 1.7-GHz processor (2.0-MB L3 cache, dual core, 35 W)

690537-001

Before removing the processor, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

96

Chapter 4   Removal and replacement procedures

ENWW

Summary of Contents for Compaq CQ58









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands