Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel.
Description
Spare part number
8X Max DVD-ROM Drive
467782-001
Before removing the optical drive, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off, turn the computer on, and then
shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery on page 29
).
Remove the optical drive:
1
.
Position the computer with the left side toward you.
2
.
Remove the Torx T8M2.5×9.0 screw
(1)
that secures the optical drive to the computer.
3
.
Insert a flat-bladed screwdriver or similar tool into the optical drive tab access
(2)
, and press the tab
to the left to release the optical drive from the computer.
4
.
Remove the optical drive
(3)
from the computer.
5
.
If it is necessary to replace the optical drive bracket, position the optical drive with the back edge
toward you.
6
.
Remove the two Phillips PM2.0×4.0 screws
(1)
that secure the bracket to the optical drive.
Component replacement procedures 33
Summary of Contents for Compaq 6720t
Page 1: ...HP Compaq 6720t Mobile Thin Client Maintenance and Service Guide ...
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
Page 114: ......
