manualshive.com logo in svg

HP Compaq 6000, Install Manual

Share
Download
HP Compaq 6000 Install Manual Download Page 14

xii

   

About This Guide

Writer: Jean Schuck   Project: Compaq Professional Workstation 6000 and 8000 Reference Guide   Comments: 270217-002

File Name: A-FRNT.DOC   Last Saved On: 12/17/97 10:51 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

!

WARNING:

    To reduce the risk of personal injury or damage to equipment,

heed all warnings and cautions throughout the installation instructions.
Because the rack allows you to stack computer components on a vertical
rather than a horizontal plane, you must take precautions to provide for rack
stability and safety.

!

WARNING:

    To reduce the risk of personal injury or damage to the

equipment, always install the heaviest items in the bottom of the rack and
load the rack from the bottom up.  This makes the rack bottom-heavy and
helps prevent the rack from becoming unstable.
See “Configuration Rules” in the Rack Planning and Installation Guide for the
rules that govern the vertical placement of rack-mounted components.  This
information is also included in the Rack Builder diskette.

!

WARNING:

    To reduce the risk of personal injury, always ensure that the

rack is adequately stabilized before extending a component outside the
rack.  Extend only one component at a time.  The rack may become
unstable if more than one component is extended for any reason.

Getting Help

If you have a problem and have exhausted the information in this guide, you
can get further information and other help in the following locations.

Compaq Website

The Compaq website has information on this product as well as the latest
drivers and Flash ROM images.  You can access the Compaq website by
logging on to the Internet at 

http://www.compaq.com

.

Summary of Contents for Compaq 6000
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands