manualshive.com logo in svg

HP Compaq 6000, Install Manual, Page: 72 / 151

Share
Download
HP Compaq 6000 Install Manual Download Page 72

4-4

    

Compaq Setup and Diagnostics Software

Writer: Jean Schuck   Project: Compaq Professional Workstation 6000 and 8000 Reference Guide   Comments: 270217-002

File Name: E-CH04.DOC   Last Saved On: 11/3/97 3:43 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Computer Checkup (TEST)

Use Computer Checkup (TEST) in the following instances:

■ 

To determine if all devices are recognized by the system and functioning
properly. Running TEST is optional, but recommended, after you install
or connect a new device.

■ 

To save, print, or display the information generated by TEST. It is
recommended that you run TEST and have the printed report available
before placing a call to the Compaq Customer Support Center.

■ 

To assist your Compaq authorized dealer, reseller, or service provider in
analyzing the system by allowing the service provider to reproduce the
same environment on another workstation for testing.

To run Computer Checkup (TEST):

1.  Turn on only the external devices that you wish to test. You may wish to

leave the printer connected to log error messages.

2.  Access the Compaq Utilities menu.

3.  From the Compaq Utilities menu, select Computer Checkup (TEST).

4.  When the test option menu appears, select the option to view the device

list.

5.  Verify that TEST correctly detected the devices installed.

NOTE

:     This utility will detect all devices manufactured by Compaq; devices

from other manufacturers may not be detected.

❏ 

If the list is correct, select OK and go on to step 6.

❏ 

If the list is incorrect, be sure that any new devices are installed
properly. If you do not find an installation problem, call your
Compaq authorized dealer, reseller, or service provider.

Summary of Contents for Compaq 6000
























































































































































Reviews:

No comments