S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
27
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(1)
OL-25090-01
Limitations and Restrictions
CFS Cannot Distribute All Call Home Information
In MDS NX-OS Release 4.2(1b), CFS cannot distribute the following Call Home commands that can be
configured with the
destination-profile
command:
•
destination-profile
profile_name
transport-method
•
destination-profile
profile_name
http
The output of the
show running-config callhome
command shows configured Call Home commands:
switch#
show running-config callhome
> version 4.1(3)
> callhome
> email-contact [email protected] <mailto:[email protected]>
> phone-c14087994089
> streetaddress xyxxyx
> distribute
> destination-profile testProfile
> destination-profile testProfile format XML
> no destination-profile testProfile transport-method email
> destination-profile testProfile transport-method http
> destination-profile testProfile http https://xyz.abc.com
> destination-profile testProfile alert-group all
> transport email smtp-server 64.104.140.134 port 25 use-vrf management
> transport email from [email protected] <mailto:[email protected]>
> enable
> commit
When you attempt to apply these commands in the ASCII configuration, the following commands fail:
> no destination-profile testProfile transport-method email
> destination-profile testProfile transport-method http
> destination-profile testProfile http
https://xyz.abc.com
To work around this issue, issue these commands after the
commit
command.
Availability of F Port Trunking and F Port Channels
Trunking F ports and trunking F port channels are not supported on the following MDS 9000
components:
•
DS-C9134-K9, Cisco MDS 9134 Multilayer Fabric Switch, if NPIV is enabled and the switch is
used as the NPV core switch
•
DS-C9124-K9, Cisco MDS 9124 Multilayer Fabric Switch, if NPIV is enabled and the switch is
used as the NPV core switch
Trunking F ports, trunking F port channels and regular F port channels are not supported on the following
MDS 9000 components:
•
DS-X9016, Cisco MDS 9000 2-Gbps16-Port Fibre Channel Switching Module
•
DS-X9032, Cisco MDS 9000 2-Gbps 32-Port Fibre Channel Switching Module
•
DS-X9032-14K9, Cisco MDS 9000 14/2-Port Multiprotocol Services Module (MPS-14/2)
For configuration information, refer to the “Configuring Trunking” section in the
Cisco MDS 9000
NX-OS Interfaces Configuration Guide
.
