background image

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

24

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(1)

OL-25090-01

  Limitations and Restrictions

Note

If you are currently using IVR non-NAT mode, migrate to IVR-NAT before you upgrade to 
NX-OS Release 5.2(1). See the migration procedure in the 

“Upgrading Guidelines Specific to 

NX-OS Release 5.2(1)” section on page 14

.

Limitations and Restrictions

This section lists the limitations and restrictions. The following limitations are described:

FCoE Module, page 25

IPv6, page 26

User Roles, page 26

Schedule Job Configurations, page 26

Maximum Number of Zones Supported in Interop Mode 4, page 26

InterVSAN Routing, page 26

Java Web Start, page 27

VRRP Availability, page 27

Using a RSA Version 1 Key for SSH Following an Upgrade, page 27

CFS Cannot Distribute All Call Home Information, page 28

Availability of F Port Trunking and F Port Channels, page 28

Reserved VSAN Range and Isolated VSAN Range Guidelines, page 29

Applying Zone Configurations to VSAN 1, page 29

Running Storage Applications on the MSM-18/4, page 29

RSPAN Traffic Not Supported on CTS Ports on 8-Gbps Switching Modules, page 29

I/O Accelerator Feature Limitations, page 30

Support for FCIP Compression Modes, page 30

Saving Copies of the Running Kickstart and System Images, page 30

Configuring Buffer Credits on a Generation 2 or Generation 3 Module, page 30

Features Not Supported on the Cisco MDS 9148 Switch, page 31

PPRC Not Supported with FCIP Write Acceleration, page 31

FCoE Module

In Cisco MDS NX-OS Release 5.2(1), you cannot install a FCoE module in a switch that is running 
DMM, SME, or IOA.

Link traps for FCoE devices are sent only when a VFC interface flaps.

Summary of Contents for Cisco MDS 8/12c













































Reviews: