HP cc2300, Product Manual, Page: 74 / 135

74 cc2300 Carrier Grade Server Product Guide
Removing and Installing Processors
WARNING
If the server has been running, any installed processor and heat sink on
the processor board(s) will be hot. To avoid the possibility of a burn,
allow the unit to cool-down and be careful when removing or installing
server board components that are located near processors.
CAUTIONS
Processor must be appropriate:
You may damage the server if you
install a processor that is inappropriate for your server. Make sure your
server can handle a newer, faster processor (thermal and power
considerations). For exact information about processor interchangeability,
contact your customer service representative.
ESD and handling processors:
Reduce the risk of electrostatic
discharge (ESD) damage to the processor by doing the following: (1) Touch
the metal chassis before touching the processor or server board. Keep part of
your body in contact with the metal chassis to dissipate the static charge
while handling the processor. (2) Avoid moving around unnecessarily.