HP C8088B, Service Manual

Page: 222 / 300

220 Troubleshooting ENWW
13.12.13
Jam in left
accessory 13.12.0D 13.12.0D 13.12.13 Amber
blinking Yellow (2 blinks) Media jammed as it entered
the accumulator. The
PPEXIT or FLEXIT sensor is
never deactivated.
Recommended action:
1 Analyze the event log for frequency of the error message.
2 Make sure that the media is well-aligned in the input trays.
3 Make sure that the media is not wrinkled before arriving to the output device.
4 Make sure that the media is coming out in the accumulator well-centered. If this is not the case, then check
the input trays to make sure that media is centered and not closer to either front or back.
5 Make sure that the media is not touching the plastic arms (wings) in the accumulator.
6 Make sure that customers are not blocking the exit of the accumulator when waiting for their print jobs.
7 Check for interference at the exit of the accumulator.
NOTE: Paper with excessive curl can block the exit.
8 Make sure that the paper-stopper clips are in their correct position.
9 Make sure that the accumulator exit roller cover is installed correctly.
10 Replace the accumulator as needed.
13.12.40
Jam in left
accessory 13.12.28 13.12.28 13.12.40 Amber
blinking Yellow (5 blinks) Media is present in the offset
module at power-on (the
OMEXIT sensor is activated).
Recommended action:
NOTE: This error condition should not be present during normal operation.
1 Make sure that nothing in the offset module is activating the exit sensor.
2 Make sure that all of the sensor flags in the offset module move freely.
3 Replace the offset module as needed.
13.12.41
Jam in left
accessory 13.12.29 13.12.29 13.12.41 Amber
blinking Yellow (5 blinks) The offset module does not
reach its home position.
Recommended action:
1 Make sure that the offset module is free of obstruction. As a countermeasure, turn the offset feature off.
2 Make sure that all of the sensor flags in the offset module move freely.
3 Replace the offset module as needed.
NOTE: When five errors in a row of this type are logged, it is an indication that the offset module has failed.
13.12.42
Jam in left
accessory 13.12.2A 13.12.2A 13.12.42 Amber
blinking Yellow (5 blinks) A jam exists in the offset
module. The OMEXIT sensor
is never deactivated.
Recommended action:
1 Analyze the event log for frequency of the error message.
2 Make sure that the media is well-aligned in the input trays.
3 Make sure that the media is not wrinkled before arriving to the output device.
4 Make sure that the media is coming out in the offset module well-centered. If this is not the case, then check
the input trays to make sure that paper is centered and not closer to either front or back.
5 Make sure that the media is not touching the plastic arms (wings) in the offset module.
6 Make sure that customers are not blocking the exit of the offset module when waiting for their print jobs.
7 Check for interference at the exit of the offset module.
NOTE: Paper with excessive curl can block the exit.
8 Make sure that the paper-stopper clips are in their correct position.
9 Replace the offset module as needed.
10 Replace the paper path assembly as needed.
Table 29. Control panel and event log messages—3,000-sheet stacker (continued)
Control panel
message
Event log, if connected to
User LED Service LED Description 9000 9000mfp
9500, 9500mfp, 9050,
9050/9040mfp