HP Brio BA410, Supplementary Manual, Page: 51 / 123

6 Advanced System Tests
Batch Tests
38 English
Selecting Batch Tests
First, you must configure the batch test. To do this, use the
Edit Batch
Parameters
submenu in the
Batch
menu. The
Edit Batch
Parameters
submenu has these commands:
•
Batch Parameters
: to configure the test mode, time limit, and
number of passes.
•
Repeat Count
: This command allows you to set the number of times
each test is run, from 1 (run test once), to 256.
•
Test Parameters
: to set the parameters for the tests included in
the batch.
Running the Batch Test
To run the batch test you have configured, select the
Run Batch
command in the
Batch
menu.
The
Batch
menu also contains these commands:
•
Save Batch
: to save the current batch test (with current settings).
•
Load Batch
: to load a previously saved batch test.
NOTE
You cannot change the order in which the tests are performed.
You can abort a batch test while it is running by pressing <
Esc
>.