HP Brio BA410, Supplementary Manual, Page: 24 / 123

English 11
2 Running e-Diagtools
Running e-Diagtools from a CD-ROM
•
Alternatively, you can set the boot device priority by pressing the
F8 key when the logo screen is displayed after restarting your
computer.
After running e-Diagtools, restore the original Setup values.
Running e-Diagtools from the HP “Recovery” CD-ROM
To run e-Diagtools from the HP PC Image Engineer - Image Library
and Diagnostics System CD-ROM for Vectra or e-PC, the Assist CD-
ROM (Drivers and Utilities) for Brio or e-PC, or the Image Creation
and Recovery CD-ROM for Kayak, follow this procedure:
1 Insert the HP CD-ROM in your CD-ROM drive. Shut down the
operating system and restart your computer.
2 Ensure that the option to start from the CD-ROM drive is enabled,
and that the CD-ROM is configured to be the first device to boot
from.
3 e-Diagtools will start automatically, or, depending on the HP
CD-ROM used, a menu appears. In this last case, select the option to
run the hardware diagnostics.
e-Diagtools will start, displaying a welcome screen.
Running e-Diagtools from the HP DiagTools CD-ROM
To run e-Diagtools from the HP DiagTools CD-ROM, follow this
procedure:
1 Insert the HP e-Diagtools CD-ROM in your CD-ROM drive. Shut
down the operating system and restart your computer.
2 Ensure that the option to start from the CD-ROM drive is enabled
and that the CD-ROM is configured to be the first device to boot
from.
3 The programs on the CD-ROM will automatically determine the
appropriate version of e-Diagtools to run.
e-Diagtools will start, displaying a welcome screen.