HP Brio BA410, Supplementary Manual

Page: 44 / 123

English 31
5 e-Diagtools Basic System Test
What is Tested
❒
SCSI hard disk drive, to check the basic functioning of any SCSI hard
disk drives:
•
Basic SCSI HDD functionality
❒
Keyboard tests:
•
Keyboard controller
•
Keyboard clock line
•
Keyboard data line
❒
Basic video features
❒
USB test
❒
Other tests:
•
Basic serial port test (does not include data transfer – this is an
advanced test)
•
Basic parallel port test (does not include actual printing – this is
an advanced test)
•
LAN and Audio tests
Each test listed above is performed only if it is appropriate for your
PC’s configuration. For example, if your PC does not have a SCSI
controller, or no SCSI hard disk is connected to the SCSI controller, no
SCSI tests will be done.
Furthermore, a component test will only be performed if the
component was correctly detected in the hardware detection phase.
For example, if you have recently installed an IDE hard disk drive and
it was not detected during the hardware detection phase, the hard disk
drive will not be tested. (For more information about hardware
detection, refer to page 19.)
NOTE
e-Diagtools does not test components that have not been detected.
However, we recommend that you run the basic system test to verify
that the underlying components are functioning correctly.