manualshive.com logo in svg

HP Brio BA410, Supplementary Manual, Page: 104 / 123

Share
Download
HP Brio BA410 Supplementary Manual Download Page 104

English

91

Appendix A   e-Diagtools Error Codes

0A00h – 0AFFh

:CD-ROM Error Codes

0A00h – 0AFFh:

CD-ROM Error Codes

Code

Explanation

Details/Parts to Check

0A00h

No CD in drive.

CD-ROM error.
Insert a CD in the CD-ROM drive.

0A01h

Eject fails on drive x.

The expected feature is either not implemented or 
does not work.
Re-run the diagnostic test.

0A02h

Close failed on drive x.

The expected feature is either not implemented or 
does not work.
Re-run the diagnostic test.

0A03h

Sequential data test failed, Drive x, 
Sector Y.

Diagnostic test error:
1) Change Media
2) Re-run the diagnostic test.
If the error persists replace the drive.

0A04h

Sequential data test failed. No data CD in 
Drive x.

Diagnostic test error:
1) Change Media
2) Re-run the diagnostic test.
If the error persists replace the drive.

0A05h

Random data test failed, Drive x, 
Sector Y.

Diagnostic test error:
1) Change Media
2) Re-run the diagnostic test.
If the error persists replace the drive.

0A06h

Random data test failed. 
No data CD in Drive x.

CD-ROM error.
Insert a data CD in the CD-ROM drive and re-run the 
diagnostic test.

Summary of Contents for Brio BA410




























































































































Reviews:

No comments