manualshive.com logo in svg

HP Brio BA410, Supplementary Manual, Page: 106 / 123

Share
Download
HP Brio BA410 Supplementary Manual Download Page 106

English

93

Appendix A   e-Diagtools Error Codes

0C00h – 0CFFh

:IDE Tape Error Codes

0C00h – 0CFFh

:IDE Tape Error Codes

Code

Explanation

Details/Parts to Check

0C01h

No medium in tape drive n.

Insert another tape in the drive and re-run the 
diagnostic test. If error persists, replace drive.

0C02h

Medium write protected.

Tape’s record switch is in write-protect position. 
Move the switch to record position.
Change tape and re-run the diagnostic test. If error 
persists, replace drive.

0C03h

Rewind failed.

Change the tape in the tape drive and re-run the 
diagnostic test.

0C04h

Erase failed.

Change the tape in the tape drive and re-run the 
diagnostic test.

0C05h

Write failed.

Change the tape in the tape drive and re-run the 
diagnostic test.

0C06h

Read failed.

Change the tape in the tape drive and re-run the 
diagnostic test.

0C07h

Signature failed.

This message is displayed when the signature is not 
found. The write test writes a signature on the tape. 
First run the write test, and then the read test.

Summary of Contents for Brio BA410




























































































































Reviews:

No comments