Powering Down the Enclosure
To perform a graceful shutdown of the enclosure and all the blade PCs, press the enclosure power
button. If your operating system is Microsoft Windows XP or Vista, the enclosure automatically performs
a graceful shutdown of all blade PCs, and then removes power from the enclosure. To perform an
emergency shut down of the enclosure and all blade PCs at the same time, press and hold the enclosure
power button for four seconds.
CAUTION:
Performing an emergency shutdown on the enclosure may result in the loss of any unsaved
data on all blade PCs.
Removing a Blade PC
To remove a blade PC:
1.
Press the release latch (1).
2.
Pull down the ejector lever (2).
3.
Remove the blade PC from the enclosure (3).
ENWW
Removing a Blade PC
29
