HP Blade bc1000, Setup And Installation Manual

Page: 110 / 146

D-16 www.hp.com Setup and Installation Guide
Troubleshooting
Blade PC Diagnostic Steps
If your Blade PC does not start, or powers up but does not complete
POST, answer the questions in Table D-9 to determine appropriate
actions based on the symptoms observed.
According to the answers you give, you are directed to the appropriate
table in the section that immediately follows. That table outlines
possible reasons for the problem, options available to assist in
diagnosis, and possible solutions.
Table D-9: Blade PC Diagnostic Steps
Question Action
Question 1: Is the power LED on the Blade PC
green? If yes, continue to Question 2 of this table.
If no, see Table D-10.
Question 2: Is the health LED on the Blade PC
green? If yes, continue to Question 3 of this table.
If no, see Table D-11.
Question 3: Is the NIC 1 or NIC 2 LED on the
Blade PC illuminated? If yes, continue to Question 4 of this table.
If no, see Table D-12.
Question 4: Is the monitor displaying information
when connected to the Blade PC through the
diagnostic adapter? If yes, use the POST messages for further
diagnosis, or continue to Table D-14.
If no, see Table D-13.