HP BCDVideo BCD108, User Manual

Page: 18 / 162

Component identification 18
•
10SFF configurations
With the 10SFF (6 NVMe + 4 SAS/SATA) Express Bay Enablement Option, the server supports
SAS, SATA, and PCIe-based NVMe drives in the following locations:
o
Bays 1 through 4 support SFF SAS and SATA drives only
o
Bays 5 through 10 support SFF PCIe-based NVMe drives only
Hot-plug SATA/SAS drive LED definitions
Item LED Status Definition
1
Locate Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an
update.
2
Activity ring Rotating green Drive activity
Off No drive activity
3
Do not remove* Solid white Do not remove the drive. Removing the drive causes one or
more of the logical drives to fail.
Off Removing the drive does not cause a logical drive to fail.
4
Drive status Solid green The drive is a member of one or more logical drives.
Flashing green The drive is rebuilding or performing a RAID migration, strip size
migration, capacity expansion, or logical drive extension, or is
erasing.
Flashing
amber/green The drive is a member of one or more logical drives and predicts
the drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.