HP BB118BV - StorageWorks Data Protector Express Package User Manual Download Page 250

Page: 250 / 365

232

Data Protector Express® User’s Guide and Technical Reference

Job Group options

Applicable objects:

Job Group

The

Options

page presents different options for a job group.

Modes

You can configure how Data Protector Express handles jobs in a job group as they run and if they
encounter any failures.

Execution mode:

Determines how Data Protector Express will execute the jobs, sequentially or

concurrently.

Failure mode:

Determines whether Data Protector Express will continue with subsequent jobs when one

fails or if the remaining jobs will be stopped.

List of jobs to be executed

The list of jobs to be executed contains all of the jobs that have been included in this job group. To move
a job, select it and use the

Move up

Move down

commands to reorganize the jobs in the list. Use the

Add

command to add more jobs to the list. Use the

Delete

command to remove a selected job from the

list. Deleting a job from a job group does not remove the job from Data Protector Express.

Log options

Use this command to set up log options for the jobs included in this group. For more information about
log options for jobs, see

Log options

on page 108.

Summary of Contents for BB118BV - StorageWorks Data Protector Express Package














































































































































































































































































































































































Search results

Summary of Contents for BB118BV - StorageWorks Data Protector Express Package

Reviews:

HP BB118BV - StorageWorks Data Protector Express Package, User Manual, Page: 250 / 365

Search results

Summary of Contents for BB118BV - StorageWorks Data Protector Express Package

Reviews: