Home
/
HP
/
BB118BV - StorageWorks Data Protector Express Package
/
User Manual

HP BB118BV - StorageWorks Data Protector Express Package, User Manual, Page: 218 / 365

Share

Page: 218 / 365

HP BB118BV - StorageWorks Data Protector Express Package User Manual Download Page 218

200

Data Protector Express® User’s Guide and Technical Reference

File system stream configuration

Use the

Configuration

page for file system drivers to enable or disable mapped drives for backups. Data

Protector Express uses these settings while creating a list of files or folders for inclusion in backup jobs.

Drives to enable:

Enter the list of drives that you want to enable for backups for the current machine.

Include in the list each drive that has been mapped on the machine. Enter the list of drives as a single
string of letters (e.g., GHIJKLMNO).

Drives to disable:

Enter each drive in this list that you do not want to be included in backups. Data

Protector Express will ignore any files or folders on these drives during backups. Enter the list of drives
as a single string of letters (e.g., GHIJKLMNO).

Check the following settings to create a list of drives for inclusion in backup jobs:

•

Enable removable drives:

Select this setting to include files located on removable drives in backups.

•

Enable network drives:

Select this setting to include files located on network drives in backups.

•

Enable CD/DVD drives:

Select this setting to include files located on CD or DVD drives in backups.

•

Enable floppy drives:

Select this setting to include files located on located on floppy drives in backups.

•

Enumerate files once:

Select this setting to include files only once in backups. Data Protector Express

uses this setting to limit the number of duplicate files that are included in any backup job.

«
...
216
217
218
219
220
...
»

Summary of Contents for BB118BV - StorageWorks Data Protector Express Package














































































































































































































































































































































































Reviews:

No comments