Enterprise Modular Library E-Series user guide
45
Installation checklist
After installing all library components, look at the back of the library and review the following checklist:
•
All tape drives should have one Fibre Channel cable connected to a port in an e2400-FC 2G
interface controller (TD0 through TD3).
•
All e2400-FC 2G interface controllers should have one Ethernet connection to the Interface Manager
card (TO FIBRE CHANNEL CONTROLLERS port).
•
All e2400-FC 2G interface controllers should have one or two Fibre Channel connections to the SAN
through the FC0 or FC1 ports.
•
The Interface Manager card should have one Ethernet connection from the CASCADE port to the
PUBLIC port on the library robotics controller.
•
The Interface Manager card should have one Ethernet connection from the NETWORK port to an
Ethernet port on your management station.
•
Each power supply on the base module or tape drive expansion module is plugged into a power
strip.
•
Each power strip is plugged into a power distribution unit.
•
Each power distribution unit is plugged into a factory AC outlet.
Install HP StorageWorks Command View TL
Command View TL is the preferred graphical user interface (GUI) for remote management and monitoring
of your library through an Interface Manager card over a LAN. From any client on the LAN, users can
use a browser to access Command View TL, which is hosted on a management station.
Read the HP StorageWorks Interface Manager and Command View TL documentation for information on
installing and configuring version 1.5.5 or later on the EML. This documentation can be obtained at
http://www.hp.com/support/cvtl
Install HP StorageWorks Library and Tape Tools
and general information, access the web site at
http://www.hp.com/support/tapetools.
Summary of Contents for AD560-96002
