21
Figure 8
Network diagram for LACP MAD detection
Device
Master
Slave
IRF virtual
device
Internet
Terminal
network
IRF link
Transmission path for common service packets
Transmission path for LACP MAD detection packets
Dynamic aggregation group on
Device, used for LACP MAD
detection and forwarding
service packets
Dynamic aggregation group of
the IRF virtual device, used for
LACP MAD detection and
forwarding services packets
2.
Configuring LACP MAD detection
Configure LACP MAD detection by following these steps:
•
Create an aggregate interface (also required on the intermediate device)
•
Configure the aggregation group to work in dynamic aggregation mode (also required on the
intermediate device)
•
Enable LACP MAD detection on the dynamic aggregate interface (not required on the intermediate
device)
•
Add member ports to the aggregation group (also required on the intermediate device)
