35
Connecting your switch to the network
This chapter describes how to connect your switch to a network.
Common methods of logging in to a switch
The first time you access a switch you must log in through the console port. On the switch, you can
configure Telnet or SSH for remote access through Ethernet ports. You manage and control console login
users at AUX user interfaces and Telnet and SSH users at VTY user interfaces. For more information about
login methods and user interfaces, see
HP A10500 Switch Series Fundamentals Configuration Guide
.
NOTE:
x
An A10500 switch with one MPU supports one AUX user and an A10500 switch with two MPUs
supports up to two concurrent AUX users. The total number of AUX users that an IRF fabric supports
equals the number of MPUs in the IRF fabric.
x
All A10500 switches support up to 16 concurrent VTY users.
Accessing the switch for the first time
The first time you access the switch you must use a console cable (see
Figure 27
) to connect a console
terminal, for example, a PC, to the console port on the switch.
A console cable is an 8-core shielded cable, with a crimped RJ-45 connector at one end for connecting
to the console port of the switch, and a DB-9 female connector at the other end for connecting to the
serial port on the console terminal.
Figure 27 Console cable
Setting up the configuration environment
To connect a terminal, for example, a PC, to the switch:
1.
Plug the DB-9 female connector of the console cable to the serial port of the PC.
2.
Plug the RJ-45 connector of the console cable to the console port of the switch.
