HP 6400cl, Management Manual, Page: 613 / 664

Stack Management for the Series 3400cl and 6400cl Switches
Configuring Stack Management
Figure 13-8. The Default Stack Configuration Screen
3. Move the cursor to the Stack State field by pressing [E] (for
Edit
).
4. Do one of the following:
• To disable stacking on the Candidate, use the Space bar to select
the
Disabled option, then go to step 5.
Note: Using the menu interface to disable stacking on a Candidate
removes the Candidate from all stacking menus.
• To insert the Candidate into a specific Commander’s stack:
i. Use the space bar to select Member.
ii. Press
[Tab]
once to display the Commander MAC Address param­
eter, then enter the MAC address of the desired Commander.
• To change Auto Join or Transmission Interval , use
[Tab]
to select the
desired parameter, and:
–
To change
Auto Join
, use the Space bar.
–
To change
Transmission Interval
, type in the new value in the
range of 1 to 300 seconds.
Note: All switches in the stack must be set to the same transmis­
sion interval to help ensure proper stacking operation. HP recom­
mends that you leave this parameter set to the default 60 seconds.
Then go to step 5.
5. press [Enter] to return the cursor to the
Actions
line.
13-15