manualshive.com logo in svg

HP 6400cl, Management Manual, Page: 26 / 664

Share
Download
HP 6400cl Management Manual Download Page 26

Getting Started 

Related Publications 

Keys 

Simulations of actual keys use a bold, sans-serif typeface with square brackets. 
For example, the “Tab” key appears as 

[Tab]

, and the “Y” key appears as 

[Y]

. 

Related Publications 

Software Release Notes. 

Release notes are posted on the HP Procurve 

website and provide information on new software updates: 

■

 

New features and how to configure and use them 

■

 

Software management, including downloading software to the switch 

■

 

Software fixes addressed in current and previous releases 

To view and download a copy of the latest release notes for your switch, see
“Getting Documentation From the Web” on page 1-6.

Product Notes and Software Update Information. 

The printed 

Read Me

First 

shipped with your switch provides product notes, and other information.

For the latest version, refer to “Getting Documentation From the Web” on
page 1-6.

Installation and Getting Started Guide. 

Use the

 Installation and Get­

ting Started Guide 

shipped with your switch to prepare for and perform the

physical installation. This guide also steps you through connecting the switch
to your network and assigning IP addressing, as well as describing the LED
indications for correct operation and trouble analysis. A PDF version of this
guide is also provided on the 

Product Documentation CD-ROM

 shipped with

the switch. And you can download a copy from the HP Procurve website. (See
“Getting Documentation From the Web” on page 1-6.)

Management and Configuration Guide. 

Use the 

Management and Con-

figuration Guide

 for information on:

■

 

Using the command line (CLI), Menu interface, and web browser interface

■

 

Learning how memory operates in the switch

■

 

IP addressing

■

 

Time protocols

■

 

Port configuration options

■

 

Interaction with network management applications

■

 

File transfers, including operation systems, configuration files, ACL com­
mand files, and diagnostic data files 

■

 

Monitoring and troubleshooting switch software operation 

■

 

MAC addressing 

■

 

Daylight time rules 

1-4 

Summary of Contents for 6400cl

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments