HP 550 - Notebook PC Maintenance And Service Manual Download

Page: 94 / 150

Select

To do this

USB port to the computer or to an optional docking
device (select models only).

●

Select a parallel port mode: EPP (Enhanced Parallel
Port), standard, bidirectional, or ECP (Enhanced
Capabilities Port).

●

Enable/disable BIOS DMA data transfers.

●

Enable/disable fan always on while connected to an AC
outlet.

●

Enable/disable Intel Data Execution Prevention or AMD®
PSAE Execution Disable. When enabled, the processor
can disable some virus code execution, which helps to
improve computer security.

●

Enable/disable LAN Power Save. When enabled, saves
power by turning off the LAN when not in use.

●

Enable/disable SATA Native Mode.

●

Enable/disable Dual Core CPU.

●

Enable/disable Secondary Battery Fast Charge.

●

Choose Bit-shift or LBA assisted HDD Translation Mode.

●

Enable/disable Windows direct application launcher.

●

Enable/disable HP Lockout.

Chapter 5 Computer Setup

Summary of Contents for 550 - Notebook PC























































































































































Search results

Summary of Contents for 550 - Notebook PC

Reviews:

Related manuals for 550 - Notebook PC

Brands by name

Popular brands

HP 550 - Notebook PC, Maintenance And Service Manual

Search results

Summary of Contents for 550 - Notebook PC

Reviews:

Related manuals for 550 - Notebook PC

Brands by name

Popular brands