manualshive.com logo in svg

HP 550 - Notebook PC, Maintenance And Service Manual, Page: 36 / 150

Share
Download
HP 550 - Notebook PC Maintenance And Service Manual Download Page 36

Spare part
number

Description

490371-201

Power cord for use in Brazil

490371-291

Power cord for use in Japan

490371-AA1

Power cord for use in the People's Republic of China

490371-AB1

Power cord for use in Taiwan

490371-AD1

Power cord for use in South Korea

490371-AR1

Power cord for use in Africa

490371-BB1

Power cord for use in Israel

490371-D01

Power cord for use in Argentina

490371-D61

Power cord for use in India

495383-001

Intel Core2 Duo T5270 1.40-GHz processor (2-MB L2 cache, 800-MHz FSB, includes replacement thermal
material)

495385-001

15.4-inch, WXGA display assembly (includes 2 WLAN antenna transceivers and cables)

495386-001

Optical drive connector board (SATA)

495388-001

Switch cover (includes button board and cable)

495395-001

System board for use only with computer models equipped with Intel GLE960 graphics chipset, Intel UMA
graphics subsystem, and PATA optical drive (includes replacement thermal material and the ExpressCard
assembly)

495397-001

System board for use only with computer models equipped with Intel GLE960 graphics chipset, Intel UMA
graphics subsystem, and SATA optical drive (includes replacement thermal material and the ExpressCard
assembly)

495398-001

Base enclosure (includes rubber feet)

495399-001

Top cover (includes TouchPad board and cable, and TouchPad button board and cable)

495400-001

Keyboard for use in the United States

495400-031

Keyboard for use in the United Kingdom

495400-041

Keyboard for use in Germany

495400-051

Keyboard for use in France

495400-061

Keyboard for use in Italy

495400-071

Keyboard for use in Spain

495400-081

Keyboard for use in Denmark

495400-091

Keyboard for use in Norway

495400-121

Keyboard for use in French Canada

495400-131

Keyboard for use in Portugal

495400-141

Keyboard for use in Turkey

495400-161

Keyboard for use in Latin America

495400-171

Keyboard for use in Saudi Arabia

495400-181

Keyboard for use in Belgium

28

Chapter 3   Illustrated parts catalog

Summary of Contents for 550 - Notebook PC























































































































































Reviews:

No comments