f.
Display lid switch module (see
Display lid switch module on page 54
)
g.
Display assembly (see
Display assembly on page 55
)
h.
Top cover (see
Top cover on page 60
)
Remove the Bluetooth module:
1.
Disconnect the Bluetooth module cable
(1)
from the system board.
2.
Remove the two Phillips PM2.0×4.0 screws
(2)
that secure the Bluetooth module to the base
enclosure.
3.
Remove the Bluetooth module
(3)
from the base enclosure.
Reverse this procedure to install the Bluetooth module.
System board
NOTE:
All system board spare part kits include the ExpressCard assembly.
NOTE:
All system board spare part kits include replacement thermal material. Replacement thermal
material is also available in the heat sink spare part kit, spare part number 456605-001.
Description
Spare part number
For use only with computer models equipped with Intel GME965 graphics chipset, Intel UMA
graphics subsystem, and PATA optical drive
495410-001
For use only with computer models equipped with Intel GLE960 graphics chipset, Intel UMA graphics
subsystem, and PATA optical drive
495395-001
For use only with computer models equipped with Intel GME965 graphics chipset, Intel UMA
graphics subsystem, and SATA optical drive
495404-001
For use only with computer models equipped with Intel GLE960 graphics chipset, Intel UMA graphics
subsystem, and SATA optical drive
495397-001
66
Chapter 4 Removal and replacement procedures
Summary of Contents for 550 - Notebook PC
