48
Product code
HP description
Max transmission distance
JD096C
HP X240 10G SFP+ SFP+ 1.2m DA Cable
1.2 m (3.94 ft)
JD097C
HP X240 10G SFP+ SFP+ 3m DA Cable
3 m (9.84 ft)
JG081C
HP X240 10G SFP+ SFP+ 5m DA Cable
5 m (16.40 ft)
NOTE:
HP recommends that you use HP 1000 Mbps SFP transceiver modules, SFP+ transceiver modules, or SFP+
cables for the SFP+ ports on the switch. The HP 1000 Mbps SFP and SFP+ transceiver modules are subject
to change over time. For the most up-to-date list of SFP and SFP+ transceiver modules, contact your HP
sales representative or technical support engineer.
For more information about the 1000 Mbps SFP transceiver modules, SFP+ transceiver modules, and
SFP+ cables, see
HP Comware-Based Switches Transceiver Modules User Guide
.
Figure 49
SFP+ cable
(1) Connector
(2) Pull latch
Combo interface
The HP 5130-24G-SFP-4SFP+ EI/HP 5130-24G-SFP-4SFP+ EI TAA switch provides eight combo interfaces.
A combo interface includes an SFP port and a 10/100/1000Base-T auto-sensing Ethernet port. Only
one of these two ports can operate at a time.
LEDs
System status LED
The system status LED shows the operating status of the switch.
Table 17
System status LED description
LED mark
Status
Description
SYS
Steady green
The switch is operating correctly.
Flashing green
The switch is performing power-on self test (POST).
Steady red
POST has failed.
Flashing yellow
Some ports have failed to pass POST.
