manualshive.com logo in svg

HP 5120 SI Series, Command Reference Manual

Share
Download
HP 5120 SI Series Command Reference Manual Download Page 88

77 

<Sysname> system-view 

[Sysname] hwtacacs scheme hwt1 

[Sysname-hwtacacs-hwt1] key accounting hello 

nas-ip (HWTACACS scheme view) 

Syntax 

nas-ip

 

ip-address 

undo nas-ip 

View 

HWTACACS scheme view 

Default level 

2: System level 

Parameters 

ip-address

: IP address in dotted decimal notation. It must be an address of the device and cannot be 

0.0.0.0, 255.255.255.255, a class D address, a class E address, or a loopback address. 

Description 

Use the 

nas-ip

 command to specify a source address for outgoing HWTACACS packets.  

Use the 

undo nas-ip

 command to remove the configuration. 

By default, the source IP address of an outgoing HWTACACS packet is the IP address of the outbound 
interface. 
The source IP address of HWTACACS packets that a NAS sends must match the IP address of the NAS 

that is configured on the HWTACACS server. An HWTACACS server identifies a NAS by IP address. 

Upon receiving an HWTACACS packet, an HWTACACS server checks whether the source IP address of 

the packet is the IP address of any managed NAS. If yes, the server processes the packet. If not, the server 
drops the packet. 
If you configure the command repeatedly, only the last configuration takes effect.  

 

 

NOTE: 

The setting by the 

nas-ip

 command in HWTACACS scheme view is only for the HWTACACS scheme, 

whereas the setting by the 

hwtacacs nas-ip

 command in system view is for all HWTACACS schemes. The

setting in HWTACACS scheme view takes precedence. 

 

Related commands: 

hwtacacs nas-ip

. 

Examples 

# Set the source address for outgoing HWTACACS packets to 10.1.1.1. 

<Sysname> system-view 

[Sysname] hwtacacs scheme hwt1 

[Sysname-hwtacacs-hwt1] nas-ip 10.1.1.1 

Summary of Contents for 5120 SI Series












































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands