manualshive.com logo in svg

HP 5120 SI Series, Command Reference Manual

Share
Download
HP 5120 SI Series Command Reference Manual Download Page 213

 

202 

Parameters 

vlan-id

: ID of the VLAN in which HABP packets are to be transmitted, in the range 1 to 4094.  

Description 

Use the

 habp server vlan

 command to configure HABP to work in server mode and specify the VLAN in 

which HABP packets are to be transmitted. 
Use the 

undo habp server

 command to configure HABP to work in the default mode. 

By default, HABP works in client mode.  
In a cluster, if a member device with 802.1X authentication or MAC authentication enabled is attached 
with some other member devices of the cluster, you also need to configure HABP server on this device. 

Otherwise, the cluster management device will not be able to manage the devices attached to this 

member device. For information about the cluster function, see the 

Network Management and 

Monitoring Configuration Guide

. 

Examples 

# Configure HABP to work in server mode and specify the VLAN for HABP packets as VLAN 2. 

<Sysname> system-view 

[Sysname] habp server vlan 2 

habp timer 

Syntax 

habp timer 

interval

 

undo habp timer 

View 

System view 

Default level 

2: System level 

Parameters 

interval

: Interval (in seconds) at which the switch sends HABP request packets, in the range 5 to 600. 

Description 

Use the 

habp timer

 command to set the interval at which the switch sends HABP request packets.  

Use the 

undo habp timer

 command to restore the default. 

The default interval is 20 seconds. 
This command is required only on the HABP server. 

Examples 

# Set the interval at which the switch sends HABP request packets to 50 seconds. 

<Sysname> system-view 

[Sysname] habp timer 50 

Summary of Contents for 5120 SI Series












































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands