manualshive.com logo in svg

HP 5120 SI Series, Command Reference Manual

Share
Download
HP 5120 SI Series Command Reference Manual Download Page 84

73 

  Packet unit 

Table 7

 

Output description 

Field Description 

HWTACACS scheme name 

Name of the HWTACACS scheme. 

Primary Authen Server 

IP address, port number, status, shared key, and VPN of the 
primary authentication server. If no primary authentication 
server is specified, this field is not available. This rule is also 

applicable to the following fields. 

Primary Author Server 

IP address, port number, status, shared key, and VPN of the 
primary authorization server. 

Primary Account Server 

IP address, port number, status, shared key, and VPN of the 
primary accounting server. 

Secondary Authen Server 

IP address, port number, status, shared key, and VPN of the 
secondary authentication server. 

Secondary Author Server 

IP address, port number, status, shared key, and VPN of the 
secondary authorization server. 

Secondary Account Server 

IP address, port number, status, shared key, and VPN of the 
secondary accounting server. 

Encryption Key 

Shared key for an authentication, authorization, or accounting 
server. 

NAS IP address 

IP address of the NAS. 
If no NAS is specified, this field displays 

Not configured

. 

Authentication key 

Authentication key, which is applicable to all authentication 
servers. The key is displayed as a string of asterisks (******). If 
no key is configured, this field displays 

Not configured

. 

Authorization key 

Authorization key, which is applicable to all authorization 
servers. The key is displayed as a string of asterisks (******). If 

no key is configured, this field displays 

Not configured

. 

Accounting key 

Accounting key, which is applicable to all accounting servers. 
The key is displayed as a string of asterisks (******). If no key 

is configured, this field displays 

Not configured

. 

Quiet interval(min) 

Quiet interval for the primary server, in minutes. 

Realtime accounting interval(min) 

Real-time accounting interval, in minutes. 

Response timeout interval(sec) 

Server response timeout period, in seconds. 

Retransmission times of stop-accounting 
packet 

Number of stop-accounting packet transmission attempts. 

Username format 

Format of the usernames to be sent to the HWTACACS server. 

Data flow unit 

Unit for data flows. 

Packet unit 

Unit for data packets. 

 

Summary of Contents for 5120 SI Series












































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands