HP 5120 SI Series Command Reference Manual Download Page 334

Page: 334 / 395

323

Field Description

tunnel local address

Local IP address of the tunnel.

tunnel remote address

Remote IP address of the tunnel.

perfect forward secrecy

Whether PFS is enabled.

proposal name

Proposal referenced by the IPsec policy.

policy enable

Whether the IPsec policy is enabled or not.

inbound/outbound AH/ESP setting

AH/ESP settings in the inbound/outbound direction, including the
SPI and keys.

display ipsec proposal

Syntax

display

ipsec

proposal

[

proposal-name

] [

{

begin

exclude

include

}

regular-expression

]

View

Any view

Default level

1: Monitor level

Parameters

proposal-name

: Name of a proposal, a string of 1 to 32 characters.

: Filters command output by specifying a regular expression. For more information about regular

expressions, see

Fundamentals Configuration Guide

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use the

display ipsec proposal

command to display information about IPsec proposals.

If you do not specify any parameters, the command displays information about all IPsec proposals.
Related commands:

ipsec

proposal

Examples

# Display information about all IPsec proposals.

<Sysname> display ipsec proposal

IPsec proposal name: aaa

encapsulation mode: tunnel

transform: ah-new

AH protocol: authentication sha1-hmac-96

Summary of Contents for 5120 SI Series












































































































































































































































































































































































































Search results

Summary of Contents for 5120 SI Series

Reviews:

Brands by name

Popular brands

HP 5120 SI Series, Command Reference Manual

Search results

Summary of Contents for 5120 SI Series

Reviews:

Brands by name

Popular brands