HP 445860-B21 - 10Gb Ethernet BL-c Switch, Reference Manual

Page: 261 / 262

Configuring the switch
261
The following table describes the Failure Detection Pair Configuration controls:
Table 184 Failure Detection Pair Configuration controls
Control Description
Enable/Disable FDP Enables or disables the Failover Pair.
LtM Ports Available Lists the ports that can be added to the Link to Monitor (LtM). Only uplink
ports (18-21) are allowed in the LtM.
LtM Ports Selected Lists the ports that are members of the LtM.
Select a port number in the LtM Ports Available list and click
Add
to add the port to
the LtM.
Select a port number in the LtM Ports Selected list and click
Remove
to remove the
port from the LtM.
LtD Ports Available Lists the ports that can be added to the Link to Disable (LtD). Only downlink
ports (1-16) are allowed in the LtD.
LtD Ports Selected Lists the ports that are members of the LtD.
Select a port number in the LtD Ports Available list and click
Add to add the port to
the LtD.
Select a port number in the LtD Ports Selected list and click
Remove to remove the
port from the LtD.
LtM Trunks Available Lists the trunk groups that can be added to the Link to Monitor (LtM). The LtM trunk
group can contain only uplink ports (18-21).
LtM Trunks Selected Lists the trunk groups that are members of the LtM.
Select a trunk group number in the LtM Trunks Available list and click
Add to add
the trunk group to the LtM.
Select a trunk group number in the LtM Trunks Selected list and click
Remove to
remove the trunk group from the LtM.
LtD Trunks Available Lists the trunk groups that can be added to the Link to Disable (LtD). LtD trunk groups
can contain only downlink ports (1-16).
LtD Trunks Selected Lists the trunk groups that are members of the LtD.
Select a trunk group number in the LtD Trunks Available list and click
Add
to add the
trunk group to the LtD.
Select a trunk group number in the LtD Trunks Selected list and click
Remove
to
remove the trunk group from the LtD.
LtM Admin Keys Available Lists the ports whose LACP Admin keys can be added to the Link to Monitor (LtM).
The LtM trunk group can contain only uplink ports (18-21).
LtM Admin Keys Selected Lists the ports whose LACP A dmin key is a member of the LtM.
Select a port in the LtM Admin Keys Available list and click Add to add the port’s
Admin key to the LtM.
Select a port in the LtM Admin Keys Available list and click Remove to remove the
port’s A dmin key from the LtM.
LtD Admin Keys Available Lists the ports whose LACP Admin keys can be added to the Link to Disable (LtD).
LtD trunk groups can contain only downlink ports (1-16).