HP 350 G1 Maintenance And Service Manual Download Page 78

Page: 78 / 159

Disconnect all external devices from the computer.

Remove the Battery (see

Battery on page 52

), and then remove the following components:

Service cover (see

Service cover on page 53

)

Hard drive (see

Hard drive on page 54

)

Optical drive (see

Optical drive on page 62

)

Keyboard (see

Keyboard on page 64

)

NOTE:

When replacing the top cover, be sure that the following components are removed from the

defective top cover and installed on the replacement top cover:

●

Fingerprint reader module (See

Fingerprint reader module on page 71

)

●

TouchPad button board (See

TouchPad button board on page 72

)

●

Card reader board (See

Card reader board on page 74

)

●

Power button board (See

Power button board on page 75

)

Remove the top cover:

Close the computer.

Turn the computer upside down with the front toward you.

Remove the two rubber feet

(1).

NOTE:

The rubber feet are included in the Rubber Kit, spare part number 746669-001.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for 350 G1
































































































































































Search results

Summary of Contents for 350 G1

Reviews:

Related manuals for 350 G1

Brands by name

Popular brands

HP 350 G1, Maintenance And Service Manual

Search results

Summary of Contents for 350 G1

Reviews:

Related manuals for 350 G1

Brands by name

Popular brands