HP 350 G1 Maintenance And Service Manual Download Page 84

Page: 84 / 159

Card reader board

Description

Spare part number

Card reader board (includes cable and double-sided adhesive)

758043-001

Before removing the card reader board, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the Battery (see

Battery on page 52

), and then remove the following components:

Service cover (see

Service cover on page 53

)

Hard drive (see

Hard drive on page 54

)

Optical drive (see

Optical drive on page 62

Keyboard (see

Top cover (see

Remove the card reader board:

Turn the top cover upside down with the front toward you.

Detach the card reader board cable

(1)

from the top cover. (The card reader board cable is

attached to the top cover with double-sided adhesive.)

Remove the Philllips PM2.0×2.0 broad head screw

(2)

that secures the card reader board to the

top cover.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for 350 G1
































































































































































Search results

Summary of Contents for 350 G1

Reviews:

Related manuals for 350 G1

Brands by name

Popular brands

HP 350 G1, Maintenance And Service Manual

Search results

Summary of Contents for 350 G1

Reviews:

Related manuals for 350 G1

Brands by name

Popular brands