HP 350 G1 Maintenance And Service Manual Download Page 104

Page: 104 / 159

Display assembly

NOTE:

The display assembly is spared at the subcomponent level only. For more display assembly

spare part information, see the individual removal subsections.

Before removing the display assembly, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the Battery (see

Battery on page 52

), and then remove the following components:

Service cover (see

Service cover on page 53

)

Hard drive (see

Hard drive on page 54

)

Optical drive (see

Optical drive on page 62

Keyboard (see

Top cover (see

Speakers (see

System board (see

System board on page 79

)

Remove the display assembly:

Release the display panel cable from the routing clips

(1)

and channel built into the

base enclosure.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for 350 G1
































































































































































Search results

Summary of Contents for 350 G1

Reviews:

Related manuals for 350 G1

Brands by name

Popular brands

HP 350 G1, Maintenance And Service Manual

Search results

Summary of Contents for 350 G1

Reviews:

Related manuals for 350 G1

Brands by name

Popular brands