HP 280 G4, Maintenance And Service Manual

Page: 36 / 111

Solid-state drive module
The M.2 solid-state drive module is located under the drive cage.
For a list of available solid-state drives, see Computer major components on page 4 .
1. Prepare the computer for disassembly ( Preparation for disassembly on page 16 ).
2. Remove the access panel ( Access panel on page 18 ).
3. Remove the optical drive ( Optical drive on page 22 ).
4. Remove the front bezel ( Front bezel on page 26 ).
5. Remove the drive cage ( Hard drive on page 24 ).
6. Remove the Phillips M2.0 × 3.0 screw (1), and then pull the module out of the socket (2).
To install the solid-state drive module, reverse the removal procedures.
28 Chapter 4 Removal and replacement procedures