HP 2533t - Compaq Mobile Thin Client Administrator'S Reference Manual Download Page 55

Page: 55 / 112

Multimedia

Using multimedia hardware

Using the audio features

The following illustration and table describe the audio features of the computer.

Component

Description

(1)

Volume mute button

Mutes and restores computer sound.

(2)

Internal microphone

Records sound.

(3)

Volume scroll zone

Adjusts speaker volume. Slide your finger to the left to decrease
volume and to the right to increase volume.

(4)

Audio-in (microphone) jack

Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.

(5)

Audio-out (headphone) jack

Connects optional powered stereo speakers, headphones, ear
buds, a headset, or television audio.

(6)

Speaker Produces

sound.

Using multimedia hardware

Summary of Contents for 2533t - Compaq Mobile Thin Client

















































































































Search results

Summary of Contents for 2533t - Compaq Mobile Thin Client

Reviews:

Related manuals for 2533t - Compaq Mobile Thin Client

Brands by name

Popular brands

HP 2533t - Compaq Mobile Thin Client, Administrator'S Reference Manual

Search results

Summary of Contents for 2533t - Compaq Mobile Thin Client

Reviews:

Related manuals for 2533t - Compaq Mobile Thin Client

Brands by name

Popular brands