Using Computer Setup
Navigating and selecting in Computer Setup
The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and
System Configuration menus.
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
f10
while the
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation
and selection are by keystroke:
●
To choose a menu or a menu item, use the arrow keys.
●
To select an item, press
enter
.
●
To close open dialog boxes and return to the main Computer Setup screen, press
esc
.
●
To view navigation information, press
f1
.
●
To change the language, press
f2
.
2.
Select the
File
,
Security
,
Diagnostics
, or
System Configuration
menu.
3.
To exit Computer Setup, choose one of the following methods:
●
To exit Computer Setup without saving your changes, use the arrow keys to select
File
>
Ignore changes and exit
. Then follow the on-screen instructions.
●
To save your changes and exit Computer Setup, use the arrow keys to select
File
>
Save
changes and exit
. Then follow the on-screen instructions.
Your changes go into effect when the computer restarts.
92
Chapter 15 Computer Setup
