HP 2520-24, Configuration Manual

Page: 68 / 110

2-26
IPv6 Management Features
IP Preserve for IPv6
Figure 2-11. Configuration File with Dedicated IP Addressing After Startup with IP Preserve
For more information on how to use the IP Preserve feature, refer to the
“Configuring IP Addressing” chapter in the current
Management and Config-
uration Guide
for your switch.
HP Switch(config)# show run
Running configuration:
; J9138A Configuration Editor; Created on release #S.15.XX
; Ver #01:05:04
hostname "HP Switch"
ip default-gateway
2001:db8:0:7::5
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-10,13-24,1-24
ip address
2001:db8::214:c2ff:fe4c:e480
exit
spanning-tree Trk1 priority 4
password manager
Because the switch’s IPv6 address and
default gateway were statically configured
(not assigned by a DHCP server), when the
switch boots up with the IP Preserve startup
configuration file (see Figure 2-10), its current
IPv6 address, subnet mask, and default
gateway are not changed.
If a switch’s current IP address was acquired
from a DHCP/Bootp server, the IP Preserve
statement is ignored and the IP addresses in
the downloaded configuration file are
implemented.