HP 2520-24, Configuration Manual

Page: 62 / 110

2-20
IPv6 Management Features
TFTP File Transfers Over IPv6
Syntax: auto-tftp < ipv6-addr > < filename >
Configures the switch to automatically download the
specified software file from the TFTP server at the specified
IPv6 address. The file is downloaded into primary flash
memory at switch startup. The switch then automatically
reboots from primary flash.
Notes: To enable auto-TFTP to copy a software image to
primary flash memory, the version number of the down-
loaded software file (for example,
S
_14_01.swi) must be
different from the version number currently in the
primary flash image.
The current TFTP client status (enabled or disabled)
does not affect auto-TFTP operation. (Refer to “Enabling
TFTP for IPv6” on page 2-15.)
Completion of the auto-TFTP process may require
several minutes while the switch executes the TFTP
transfer to primary flash, and then reboots again.
The
no
form of the command disables auto-TFTP operation
by deleting the
auto-tftp
entry from the startup configuration.
The
no auto-tftp
command does not affect the current TFTP-
enabled configuration on the switch. However, entering the
ip ssh filetransfer
command automatically disables both
auto-
tftp
and
tftp
operation.