HP 248 G1 Maintenance And Service Manual Download

Page: 115 / 143

Updating the BIOS

Updated versions of the BIOS may be available on the HP Web site.

Most BIOS updates on the HP Web site are packaged in compressed files called

SoftPaqs

Some download packages contain a file named Readme.txt, which contains information regarding

installing and troubleshooting the file.

Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently installed

on the computer, you need to know the version of the system BIOS currently installed.

BIOS version information (also known as

ROM date

and

System BIOS

) can be displayed as follows:

Start Computer Setup.

Use a pointing device or the arrow keys to select

File > System Information

To exit Computer Setup without saving your changes, click the

Exit

icon in the lower-left corner of

the screen, and then follow the on-screen instructions.

– or –

Use the

tab

key and the arrow keys to select

File > Ignore Changes and Exit

, and then

press

enter

NOTE:

You can also determine the BIOS version by turning on or restarting the computer, pressing

the

esc

key while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the

screen, and then pressing the

key. Follow the on-screen instructions to exit this screen.

Downloading a BIOS update

CAUTION:

To reduce the risk of damage to the computer or an unsuccessful installation, download

and install a BIOS update only when the computer is connected to reliable external power using the AC

adapter. Do not download or install a BIOS update while the computer is running on battery power,

docked in an optional docking device, or connected to an optional power source. During the

download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Suspend or Hibernation.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

Open your web browser. For U.S. support, go to

http://www.hp.com/go/contactHP

. For

worldwide support, go to

http://welcome.hp.com/country/us/en/wwcontact_us.html

Follow the on-screen instructions to identify your computer and access the BIOS update you want

to download.

Linux – Computer Setup (BIOS) and Advanced System Diagnostics

107

Summary of Contents for 248 G1
















































































































































Search results

Summary of Contents for 248 G1

Reviews:

Related manuals for 248 G1

Brands by name

Popular brands

HP 248 G1, Maintenance And Service Manual

Search results

Summary of Contents for 248 G1

Reviews:

Related manuals for 248 G1

Brands by name

Popular brands