c.
Optical drive (see
Optical drive on page 50
)
d.
Keyboard (see
Keyboard on page 52
)
NOTE:
When replacing the top cover, be sure that the following components are removed from the
defective top cover and installed on the replacement top cover:
●
Fingerprint reader module (See
Fingerprint reader module on page 59
)
●
TouchPad button board (See
TouchPad button board on page 60
)
●
Card reader board (See
Card reader board on page 62
)
●
Power button board (See
Power button board on page 63
)
Remove the top cover:
1.
Close the computer.
2.
Turn the computer upside down with the front toward you.
3.
Remove the two rubber feet
(1).
NOTE:
The rubber feet are included in the Rubber Kit, spare part number 746669-001.
4.
Remove the ten Phillips PM2.5×6.5 screws
(2)
that secure the top cover to the base enclosure.
5.
Remove the two Phillips PM2.0×2.0 broad head screws
(1)
in the optical drive bay that secure
the top cover to the base enclosure.
56
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
