RTC battery
Description
Spare part number
RTC battery
746439-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
).
5.
Remove the optical drive (see
), if installed.
6.
Remove the bottom cover (see
7.
Remove the system board (see
).
To remove the RTC battery:
1.
Position the system board upside down.
2.
Using a thin tool, disengage the battery from the socket (1), and then remove the battery (2).
Reverse this procedure to install the RTC battery.
58
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for 240 G6
