HP 240 G6 Maintenance And Service Manual Download Page 16

Page: 16 / 108

Display

Component

Description

(1)

WLAN antennas*

Send and receive wireless signals to communicate with wireless local
area networks (WLANs).

(2)

Camera light

On: The camera is in use.

(3)

Camera

Records video and captures photographs. Some models allow you to
video conference and chat online using streaming video.

To use the camera:

▲

Type

camera

in the taskbar search box, and then select

Camera.

(4)

Internal microphone

Records sound.

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions.

For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or
region.

To access this guide:

Type

support

in the taskbar search box, and then select the HP Support Assistant app.

‒

or –

Click the question mark icon in the taskbar.

Select My PC, select the Specifications tab, and then select User Guides.

Chapter 2 Components

Summary of Contents for 240 G6













































































































Search results

Summary of Contents for 240 G6

Reviews:

Related manuals for 240 G6

Brands by name

Popular brands

HP 240 G6, Maintenance And Service Manual

Search results

Summary of Contents for 240 G6

Reviews:

Related manuals for 240 G6

Brands by name

Popular brands