HP 2/8q Fibre Channel Installation Manual Download Page 11

Page: 11 / 70

About this Guide

HP StorageWorks 2/8q Fibre Channel Switch Installation Guide

HP technical support

Telephone numbers for worldwide technical support are listed on the following HP web site:

http://www.hp.com/support/

. From this web site, select the country of origin.

Note:

For continuous quality improvement, calls may be recorded or monitored.

Be sure to have the following information available before calling:

■

Technical support registration number (if applicable)

■

Product serial numbers

■

Product model names and numbers

■

Applicable error messages

■

Operating system type and revision level

■

Detailed, specific questions

HP storage web site

The HP web site has the latest information on this product, as well as the latest drivers. Access
storage at:

http://www.hp.com/country/us/eng/prodserv/storage.html

. From this web site,

select the appropriate product or solution.

HP authorized reseller

For the name of your nearest HP Authorized Reseller:

■

In the United States, call 1-800-282-6672

■

In Canada, call 1-800-863-6594

■

Elsewhere, see the HP web site for locations and telephone numbers:

http://www.hp.com

Summary of Contents for 2/8q Fibre Channel







































































Search results

Summary of Contents for 2/8q Fibre Channel

Reviews:

Brands by name

Popular brands

HP 2/8q Fibre Channel, Installation Manual

Search results

Summary of Contents for 2/8q Fibre Channel

Reviews:

Brands by name

Popular brands