manualshive.com logo in svg

HP 2/8q Fibre Channel, User Manual

The HP 2/8q Fibre Channel user manual is a comprehensive guide providing in-depth instructions for optimal utilization of this product. With a user-friendly interface, the manual can be easily downloaded for free from our website, offering all necessary information to enhance your experience with the HP 2/8q Fibre Channel.

Share
Download
background image

Switch Manager

84

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide

Port Information data window

The Port Information data window displays port detail information for the selected port. To 
open the Port Information data window, click the Port Info tab below the data window in the 
faceplate display. 

Table 24

 describes the Port Information data window entries.

Table 24:  Port Information data window entries

Entry

Description

Port Address

Port Fibre Channel address.

Administrative Port 

Type

The port type (G, GL, F, FL, or Donor) that the port is configured as. 

This value is persistent; it is maintained during a switch reset. During a 

port auto-configuration it is used to determine which operational port 

states are allowed. 

Operational Port Type

The port type that is currently active. This is set during port 

auto-configuration based on the administrative port type. 

Administrative Port 

State

The port state (Online, Offline, Diagnostics, or Down) which has been 

set by the user. This state may be different from the configured 

administrative state if the user has not saved it in the switch 

configuration. This state is used at the time it is set to try to set the port 

operational state. This value is not persistent and is lost on a switch 

reset.

Operational Port State

The port state that is currently active. This value may be different from 

the administrative port state, for example due to an error condition.

Configured 

Administrative Port 

State

The port state (Online, Offline, Diagnostics, or Down) which is saved 

in the switch configuration, either by the user or at the factory. This 

value is persistent; it is maintained during a switch reset, and is used 

after a reset to set the port operational state. 

Logged In

Indicates whether logged in or not.

MFS Mode

Port tuning indicator.

I/O Stream Guard

Whether RSCN suppression is enabled or disabled.

Administrative Port 

Speed

The speed requested by the user.

Operational Port 

Speed

The speed actually being used by the port.

Interop Credits

Whether Interop credits have been set. (not supported)

Device Scan

Queries the connected device during login for FC-4 descriptor 

information. Disable this parameter only if the scan creates a conflict 

with the connected device.

Symbolic Name

Port symbolic name.

Ext Credits Requested

Whether extended credits have been requested for ports.

Credits to Donate

The number of credits available to be donated by the selected port.

Donor Group

The donor group of the selected port.

Valid Donor Groups

The number of separate groups within which extended credits may be 

donated and assigned.

Medium

The transceiver type. 

Summary of Contents for 2/8q Fibre Channel





























































































































































































Reviews:

No comments

Related manuals for 2/8q Fibre Channel

Control 4 C4-SW120277 Series Installation Manual preview
C4-SW120277 Series
Brand: Control 4 Pages: 4
hager TS 204 User Instruction preview
TS 204
Brand: hager Pages: 2
Topex multiSwitch User Manual preview
multiSwitch
Brand: Topex Pages: 170
IOGear GHDMIMS52 Quick Start Manual preview
GHDMIMS52
Brand: IOGear Pages: 1
Omron WLM - Datasheet preview
WLM -
Brand: Omron Pages: 10
S&S Northern Merlin CS1 User Manual preview
Merlin CS1
Brand: S&S Northern Pages: 8
DANLERS CEFLA PIR DALIP Installation Notes preview
CEFLA PIR DALIP
Brand: DANLERS Pages: 2
Maiwe MIEN1203-F User Manual preview
MIEN1203-F
Brand: Maiwe Pages: 5
Origin Instruments Swifty SW2 User Manual preview
Swifty SW2
Brand: Origin Instruments Pages: 6
Hall Research Technologies Genesis Digital HSM-04-02 User Manual preview
Genesis Digital HSM-04-02
Brand: Hall Research Technologies Pages: 28
Vivanco SBX 95 SE - AV Control 4 Instructions Manual preview
SBX 95 SE - AV Control 4
Brand: Vivanco Pages: 16
Stahl 8537/2 Operating Instructions Manual preview
8537/2
Brand: Stahl Pages: 28
Tripp Lite N052-P24 Quick Start Manual preview
N052-P24
Brand: Tripp Lite Pages: 8
Conrad 97 49 18 Operating Instructions Manual preview
97 49 18
Brand: Conrad Pages: 8
Ihse Draco tera K480-80C User Manual preview
Draco tera K480-80C
Brand: Ihse Pages: 214
KinAn KM0104 Manual preview
KM0104
Brand: KinAn Pages: 7
Rose electronics UltraMatrix UM16-0X16U/E2 Specifications preview
UltraMatrix UM16-0X16U/E2
Brand: Rose electronics Pages: 2
Black & Decker Lights Out 90539953 Instruction Manual preview
Lights Out 90539953
Brand: Black & Decker Pages: 5

Brands by name

Popular brands

Load more brands