manualshive.com logo in svg

HP 17 Laptop PC, Maintenance And Service Manual

Share
Download
HP 17 Laptop PC Maintenance And Service Manual Download Page 85

Power connector

Description

Spare part number

Power connector cable

810326-010

Before removing the power connector cable, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 32

).

5.

Remove the optical drive (see 

Optical drive on page 33

).

6.

Remove the bottom cover (see 

Bottom cover on page 41

).

7.

Remove the fan/heat sink (see 

Heat sink assembly on page 58

).

8.

Remove the display (see 

Display assembly on page 65

).

To remove the power connector cable:

▲

Pull the tabs away from the connector and remove the power connector from the computer.

Reverse this procedure to install the power connector cable.

Component replacement procedures

77

Summary of Contents for 17 Laptop PC















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands