HP 17 Laptop PC Maintenance And Service Manual Download

Page: 58 / 110

Solid-state drive

Description

Spare part number

512-GB solid-state drive

763008-016

256-GB solid-state drive

865902-014

128-GB solid-state drive

827560-045

Before removing the solid-state drive, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Remove the battery (see

Battery on page 32

Remove the optical drive (see

Optical drive on page 33

Remove the bottom cover (see

Bottom cover on page 41

Remove the solid-state drive:

Remove the Phillips PM2.0×2.0 screw (1) that secures the drive to the system board.

Remove the drive (2) by pulling it away from the connector.

NOTE:

Solid-state drives are designed with notches to prevent incorrect insertion.

Reverse this procedure to install the solid-state drive.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for 17 Laptop PC















































































































Search results

Summary of Contents for 17 Laptop PC

Reviews:

Related manuals for 17 Laptop PC

Brands by name

Popular brands

HP 17 Laptop PC, Maintenance And Service Manual

Search results

Summary of Contents for 17 Laptop PC

Reviews:

Related manuals for 17 Laptop PC

Brands by name

Popular brands