Optical drive connector
Description
Spare part number
Optical drive connector
926521-001
Before removing the optical drive connector, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
).
To remove the optical drive connector:
1.
Disconnect the optical drive connector cable from the system board (1).
2.
Remove the Phillips PM2.0×4.0 screw (2) that secures the optical drive connector to the computer.
3.
Remove the optical drive connector and cable (3).
Reverse this procedure to install the optical drive connector.
Component replacement procedures
53
Summary of Contents for 17 Laptop PC
