manualshive.com logo in svg

HP 16-port SCS, Installation Instructions Manual, Page: 3 / 123

Share
Download
HP 16-port SCS Installation Instructions Manual Download Page 3

HP 16- and 48-Port Serial 
Console Servers 

Installation Instructions 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Read instructions completely before beginning installation procedure. 

© Copyright 2006 Hewlett-Packard Development Company, L.P. 

The information contained herein is subject to change without notice. The only 
warranties for HP products and services are set forth in the express warranty 
statements accompanying such products and services. Nothing herein should 
be construed as constituting an additional warranty. HP shall not be liable for 
technical or editorial errors or omissions contained herein. 

Part number: 391189-002 

Second edition: March 2006 

 

 

 

Overview 

The HP 16- and 48-Port Serial Console Server (SCS) ships with rack–
mounting hardware for easy integration into the rack. Before 
installing the console switches and other components in the rack 
cabinet (if not already installed), stabilize the rack in a permanent 
location. Begin installing the equipment at the bottom of the rack 
cabinet, and then work to the top. Avoid uneven loading or 
overloading of the rack cabinets. 

Installation checklist 

Before installation, See the following lists to be sure that all of the 
listed components were received. 

Kit contents 

•

 

One of the following products: 

•

 

One HP 16-Port Serial Console Server (with mounting shelf) 

•

 

One HP 48-Port Serial Console Server (with mounting 
brackets) 

•

 

Power cords 

•

 

Mounting hardware (screws, cage nuts, and clip nuts) 

•

 

Loopback connector 

•

 

Documentation/firmware CD kit 

This kit might contain extra hardware for your convenience. 

Required tools 

•

 

Phillips screwdriver 

•

 

T-25 Torx driver 

Summary of Contents for 16-port SCS




























































































































Reviews:

No comments